Night Owl 6

home *** CD-ROM | disk | FTP | other *** search

/ Night Owl 6 / Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso / 034a / shuffl20.zip / SHUFFLE.DOC < prev next >

Wrap

Text File | 1992-02-20 | 17KB | 378 lines

WORD SHUFFLE v2.0 by Al Lawrence Sunrise-80 BBS (404) 256-9525 OVERVIEW ________ Word Shuffle is a word game whereby the computer has scrambled the letters of a word and you must unscramble it to make points. The game is pretty straight forward and the package also contains a program which add new puzzles to the database and as an event, will create new puzzles and start a new game, as soon as a pre-determined number of players have solved all the puzzles. This is done automatically, all you must do is ensure that there are an adequate suppply of puzzles in the database. The same program used in the event process is the same one you will use to add words to the database. NOTE: Most errors will be logged to a file called DFRAME.ERR, which is created in the directory you run the door from. INSTALLATION ____________ Installation is fairly easy and straight-forward. The following steps and examples should have you up and running in a very short period of time. It is assumed that you are familiar with setting up DOORS on your system. To this end, only examples of the configuration file and Door batch file are described. 1) Create a directory to hold all WORD SHUFFLE files. 2) Unzip SHUFFLxx.ZIP into the the above directory. NOTE: BRUN45.EXE is not included but is required !!! 3) Create a configuration file, with a name of your choice, or modify the supplied SHUFFLE.CFG file. A description follows: ** Location of System File (See Below) SUNRISE-80 BBS Your BBS Name Al Sysop's First Name Lawrence Sysop's Last name 00000000 Registration Number 1 # 1 Number of plays per day/caller (1-3) (Sysop gets 99 in registerd version ONLY!) # 2 Keyboard Timeout Value in Minutes. 50 Number of entries in the Top Score file # NONE Full drive:\path\filename for Top Score Bulletin, or NONE # NONE Full drive:\path\filename for Top Score Bulletin (Color), or NONE # 20 Number of puzzles comprising the game(QUE) 2 1 = Do Not Display ADOPT-A-DOOR Message 2 = Display ADOPT-A-DOOR Message 3 The number of players that must complete all puzzles, before the puzzles are changed automatically by SHUFWORD, in your nightly event processing. ! # 0 Time Remaining in Door (Sysop = Time Remaining - REG. VERSION) ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day ! # 000=00/00 Security Level/Games Allowed Per Day @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To @ # XXXX/YYYY Blackout Range From/To ** = Replace with ONE of the following: C:\PCB\PCBOARD.SYS <- For PCBoard systems using PCBOARD.SYS only C:\BBS\CALLINFO.BBS <- For Wildcat! systems (prior to v3.0) C:\BBS\USERINFO.DAT <- For Wildcat! systems using v3.x (Note:DOOR.SYS must be in SAME directory) C:\BBS\DOOR.SYS <- For systems that support DOOR.SYS C:\BBS\DORINFOx.DEF <- For QBBS/RBBS/RA. Replace x with Node #. C:\BBS\SFDOORS.DAT <- For Spitfire systems. C:\BBS\CHAIN.TXT <- For WWIV systems # = Requires registration to change to a different value ! = See "Plays Per DAY/DOOR Time" Below @ = See "Blackout Periods" Below NOTE:THERE ARE TO BE NO BLANK LINES IN THIS FILE ! 4) When running more than one node, be sure to supply a different configuration name for each node (your choice of name) and change the first entry in the .CFG (if necessary). BLACKOUT PERIODS ________________ Use the Blackout ranges option to define up to 5 time periods during which you DO NOT want the Door to be played. If a caller tries to access the Door during the Blackout period, they will be shown a message that contains ALL the Blackout periods you have defined, and to try the Door at a later time. Each of the 5 Blackout ranges takes the form of XXXX/YYYY, where XXXX=beginning time and YYYY=the ending time. For example, 0930/1230 means to NOT allow the Door to be played between 9:30am and 12:30pm. IMPORTANT: - All times must be 4 digits & must follow the XXXX/YYYY format - DO NOT change the XXXX/YYYY entry UNLESS you want to assign a Blackout range. - You MUST use the MILITARY time format. Example: 2030=8:30pm 0900=9am, 0030=12:30am, 1700=5pm, etc. PLAYS Per DAY/DOOR Time _______________________ Plays Per Day and Door Time can be controlled several ways: (1) You can use the Games Per Day, singular option, in the config file above. This option, will affect ALL callers whose Security Level is NOT defined in any of the 10 optional Security Level/ Plays Per Day entries in the config file. (2) You can use the Door Time, singular option, in the config file above. This option, will affect ALL callers whose Security Level is NOT defined in any of the 10 optional Security Level/ Plays Per Day/Door Time entries in the config file. (3) You can restrict the number of games a specific Security Level will be allowed to play per day or REWARD specific Levels with more Plays Per Day. Likewise, you can restrict the Play time for a specific Security Level or REWARD specific Levels with more Door Time. These options are handled by the use of the 10 config entries (000=00/00). The format of each entry is as follows: XXX=YY/ZZ where XXX is the Security Level (must be 3 digits) where = is a constant and MUST be included where YY is the # of games per day (must be 2 digits) where / is a constant and MUST be included where ZZ is num. minutes per Door entry (must be 2 digits) If the callers Security Level is NOT defined, his/her Plays Per Day and Door Time will be controlled by the values in items (1) and (2), above, respectively.. You may define up to 10 Security Levels. All unused entries must be defined as 000=00/00 -------------------------------------------------------------------- Example: Suppose you had 3 Security Levels defined on your BBS as (20=Subscriber, 30=Visiting Sysop, 40=CoSysop, 90=Friend) and you wanted to set Plays Per Day as : Subscriber=5 Visiting Sysop=2 CoSysop=3 Friend=10 and Door Time as follows: Subscriber=30 minutes Visiting Sysop=20 minutes CoSysop=10 minutes Friend=remaining call time You would set the Individual "Games per Day" config entry to 1 and the individual "Door Time" to 5 minutes (these would be the default number of games and default Time for all Security Levels other than 20,30 or 40... make them any number you want). Next you would replace 4 of the Security Level entries as : 020=05/30 030=02/20 040=03/10 090=10/0 COM Support ___________ Support for COM 1-4 on the standard IRQ's - COM1/COM3 = IRQ4 and COM2/COM4 = IRQ3. If you wish to use a non-standard IRQ, add the IRQ number after the configuration filename. Let's assume your Door is called FOOBAR and you want to use COM1 and IRQ5. The command line passed to your Door would be: FOOBAR FOOBAR.CFG /5 The /5 tells FOOBAR to use IRQ5 rather than the standard IRQ4 that is normally used with COM1. No /x parameter is needed for the standard IRQ's. SHUFWORD --------- This is the Word Shuffle utility maintenance progam. This program is used to add words to the Shuffle database and to perform the nightly maintenance. Note: If running an unregistered copy you will be restricted to 60 words in the Shuffle database vs 1000 words in the registered copy and you will not be able to run as a nightly event. ******************************************************************** * * * Assuming that your config file is named SHUFFLE.CFG, use the * * following EXAMPLE to run SHUFWORD to add words to the * * SHUFFLE database. ^^^^^^^^^ * * * * cd\pcb\doors\shuffle * * SHUFWORD SHUFFLE.CFG * * * ******************************************************************** EVENT PROCESSING ________________ After your callers complete all the words you have defined, it becomes necessary to change them and start a new game. This task can be done manually, using SHUFWORD or automatically, as part of your nightly EVENT process. As a nightly EVENT, SHUFWORD checks to see if the number of players, as defined in the configuration file, have completed all words, in which case it will automatically supply a new set of words and reset/update the appropriate files. The following is an EXAMPLE of what needs to be placed in your EVENT.SYS file (PcBoard): CD\PCB\DOORS\SHUFFLE Location of SHUFFLE files SHUFWORD SHUFFLE.CFG /E EXE filename and config filename CD\PCB BOARD ADOPT-A-DOOR ____________ Having been a Sysop for a number of years, I have had my share of problems and frustrations getting financial support for my board's upkeep. A fellow Sysop left a message on my board, not long ago, about a concept that was being used by several boards around the country. The concept, ADOPT-A-DOOR, allows a caller to register (ADOPT) a door. It would be the same as sending in a donation, only this way it is earmarked for registering a particular door. In a way, the user feels he/she is "getting something in return". As a Door author I have decided to build this concept into each of my Door programs. The concept replaces the usual message "tell the Sysop to register this Door" we find in most doors. If the Door is unregisterd then a message appears on the opening screen to that effect. After finishing or suspending a game, a message screen is displayed about the ADOPT-A-DOOR concept. The message also tells the caller to contact the Sysop to find out if there is any further details to the ADOPT-A-DOOR concept. Some Sysops give extra D/L time, online time, etc to callers that ADOPT-A-DOOR. If the Door has been registered, either by the Sysop or other callers, the names of those contributors will be displayed in the closing screen. NOTE: If you want to display the names of the callers that contributed to registering the Door, you must create an ASCII file called ADOPT.SYS. You create it with an Editor or Word Processor. Enter the name(s) of the contributors (one on each line, maximum of 5 entries, each a maximum of 30 characters long). This file must be saved, in ASCII format, and placed in the Door directory. LEGALITIES __________ THIS SOFTWARE AND ACCOMPANYING MATERIALS ARE DISTRIBUTED "AS IS" WITHOUT WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ANYONE INVOLVED WITH THE CREATION AND PRODUCTION OF THIS PRODUCT BE LIABLE FOR INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF ANY USE THEREOF OR BREACH OF ANY WARRANTY. DISTRIBUTION ____________ You may make this file available for downloading from your BBS or you may upload it to any BBS of your choice, provided that you do not make any changes to the contents of the archive (ZIP file). The archive and its individual contents may not be used by any service that charges any money whatsoever, without the written permission of the author. REGISTRATION ____________ Registration and the subsequent insertion of the registration number into your configuation file, allows for the display of your BBS name on the opening and closing screen as well as the reduction of a delay built into the opening screen display along with the ability to change certain values in the configuration file. To register your copy of WORD SHUFFLE, please fill out the registration form (REGISTER.FRM) and mail it along with a small donation ($20,25,etc) to the name and address on the form or supply a self-addressed stamped envelope for registration number by return mail.t Be sure to use the proper upper/lower case when filling in your name and BBS name, as they MUST match the way you entered them in the configuration file. ^^^^ Based upon information supplied on the registration form, I will pre- register you on my BBS. You will then be able to call SUNRISE-80 and pick up your registration number. MISC ____ The latest version of WORD SHUFFLLE and other fine SUNRISE DOOR programs are always available for download from SUNRISE-80 BBS. Remember, should you have any problems, questions or suggestions, be sure to drop me a message on either of the aforementioned BBS'. I am now a PCRelay node (SUNRISE) and can be reached thru the SYSOP, BBSDOORS, PCBhints RIME conferences.